Posted by: Northwest Eye in refraction eye test on March 27, 2026
Know what a refraction measures
A refraction eye test measures your prescription for glasses or contact lenses. The test measures your current focusing error rather than diagnosing every condition that can affect your eyes.
A refractive error happens when light does not focus properly on the retina, the light-sensitive layer at the back of the eye. Refraction can detect this focusing problem and show which lens powers may help you see more clearly.
A refraction result is usually recorded as a prescription with three main parts: sphere, cylinder, and axis. Those terms describe lens power and astigmatism, a focusing problem related to the eye’s shape.
Your refraction result shows the lens strengths needed for glasses or contacts to bring your vision as close to 20/20 as possible. The prescription is useful, but it is only one piece of understanding why your vision looks blurred or has changed.
The practical answer is simple: refraction tells you what lens correction may improve clarity. During a cataract evaluation, the same measurement helps the eye-care professional compare your current focusing needs with the rest of your eye findings.
See why refraction matters during a cataract evaluation
A refraction may be part of a routine eye exam to check whether you need glasses or contact lenses.
A routine refraction does not tell you by itself why your vision has changed. The clinician considers the result with your symptoms and the rest of the examination.
A cataract evaluation uses refraction to check your current focusing error and your need for corrective lenses.
If cataract surgery is needed, refraction helps guide the power of the intraocular lens, or IOL, placed inside the eye. The refraction contributes to that planning, but it does not select a lens on its own.
A new prescription may describe your focusing needs today, while the broader evaluation determines what is happening inside the eye and whether cataract treatment should be discussed.
Bring your current glasses or contact-lens information if you have it. The clinician can compare your present correction with the new measurements during the visit.
Start with the first vision measurements
Baseline vision measurements come before the lens comparison portion of a refraction. The described protocol checks your right eye, your left eye, and both eyes together before the refraction begins.
You may read an eye chart with one eye covered and then repeat the check with the other eye.
Near-vision testing is added when you report near-vision complaints or have presbyopia, the age-related loss of close focusing ability. The described protocol documents near acuity using M-notation, which records the size of print you can read at a set distance.
The testing distance is also recorded when it differs from 16 inches, or 40 centimeters. This detail gives the result a clear context instead of treating every near-vision measurement as interchangeable.
Your job during these first measurements is to look steadily at the chart and respond when you can see the letters. Tell the clinician if a line looks blurred, doubled, or difficult to read rather than guessing silently.
The starting measurements give the clinician a baseline for the lens comparisons that follow.
Understand the machine and light-based checks
Objective refraction provides an objective measure of refractive error. The measurement looks at how light enters your eye and bends through the cornea and natural lens toward the retina.
Objective testing may begin with an auto-refractor or retinoscopy. These methods provide information about refractive error without relying on the same type of answer you give during the later lens comparison.
An auto-refractor is computerized equipment. You usually look toward the device while it gathers the measurement.
The machine’s number is not automatically your final prescription, because your visual responses and the rest of the examination still matter.
Retinoscopy provides an objective measure of refractive error. Retinoscopy does not require you to focus on an image for several seconds while staying completely still.
The clinician observes how the light behaves as it enters the eye.
Retinoscopy can also provide clues to corneal disease and cloudy areas in the lens. Those clues still need interpretation with the rest of the eye examination.
Autorefraction can provide a starting point, but it does not substitute for subjective refraction. The final lens choice is checked through your responses during the comparison portion of the test.
One comparison found that retinoscopy agreed better with subjective refraction for sphere power, while autorefraction and other methods showed closer agreement for the cylinder component. This supports treating objective testing as a starting point, not a complete prescription by itself. That distinction matters if an automated reading seems surprising: it can inform the starting point, but the clinician still checks the result against your responses. In the cited study, retinoscopy was reported as more accurate than automatic refraction when performed by an experienced clinician and provided a better starting point for noncycloplegic refraction. This finding describes the study, not a guarantee that one method is best for every patient.
Compare lenses and answer which looks clearer
Subjective refraction uses your visual responses to refine the initial measurement. You look through a phoropter, a device containing multiple lenses, while the clinician changes the lens powers.
The familiar questions are simple: which view is clearer, the first or the second? Try to compare the two choices rather than search for a perfect answer. Your response helps the clinician select the lens strength that gives the clearest useful vision.
The subjective portion generally follows this sequence:
- The clinician obtains an objective starting point through auto-refraction or retinoscopy.
- You read the chart with each eye separately.
- The clinician changes lens powers in the phoropter.
- You compare the choices and identify which view looks clearer.
- The clinician refines the prescription until your vision no longer improves with the tested changes.
The exact order can vary with the examination and the information already available. The key point is that your answers refine the objective measurement rather than replace the eye examination.
One described subjective-refraction technique decreases lens power in 0.25-diopter steps, where a diopter is a unit of lens power. The clinician continues until you can see the 20/20 or 20/15 line, or until another change no longer improves your vision.
In the same technique, if there is no loss of vision, the clinician adds another +0.75 diopters and checks for a decrease of 2 to 3 lines from the starting point. This is a technical step for the examiner, not a number you should try to calculate or choose yourself.
Cylinder testing refines correction for astigmatism. In the described technique, when the refractive error is mainly cylindrical or auto-refraction finds 1.00 diopter of cylinder or more, the clinician checks the cylinder axis first; otherwise, the clinician checks cylinder power first.
You do not need to know which sequence applies before the appointment. Answer each comparison as clearly as you can, and mention if the choices look equally clear or if neither view looks sharp.
Responses during some refraction steps are not always accurate, and fatigue can make subjective responses poorer. Tell the clinician if you are tired or unsure instead of forcing a choice.

Read prescription terms in general
Sphere describes the basic focusing power in a glasses or contact-lens prescription. A plus sphere value describes farsightedness, while a minus sphere value describes nearsightedness.
The sign tells you the general direction of the correction, not how healthy your eyes are. The amount of sphere power shows how much lens correction the prescription uses for that focusing error.
Cylinder describes the amount or degree of astigmatism. Astigmatism occurs when the eye’s front surface is shaped less like a basketball and more like an American football, so light does not focus evenly.
As the cylinder power number increases, distortion increases and more correction is needed for good vision. Cylinder is read together with the axis rather than by itself.
Axis describes the orientation of astigmatism on the eye. Axis numbers run from 0 to 180 degrees, so the number identifies direction rather than the strength of the correction.
A prescription can therefore show sphere, cylinder, and axis as separate entries. The three terms work together to describe the lens combination used for clearer vision.
Your prescription numbers are not a complete explanation of your vision. Ask the eye-care professional to explain any term that is unfamiliar, especially if the result differs from an older prescription or your symptoms have changed.
Use the result without overreading it
A normal uncorrected refraction result is described as zero refractive error, also called plano, with vision expected to be 20/20, or 6/6. A refractive error means you need lens power to see clearly, and the prescription numbers describe those powers.
A 20/20 result refers to visual acuity on the tested chart. It does not explain every reason your vision may feel blurred, strained, dim, or distorted.
In the United States, 20/20 is commonly treated as the lower limit of normal or as a screening cutoff. Maximum human acuity can be finer, at 20/16 to 20/12, so 20/20 is not the same as perfect vision.
Even 20/20 vision does not necessarily mean that every part of vision is completely normal. Problems such as reduced contrast or color vision changes can still be present.
To have 20/20 vision without glasses or contact lenses, you must have low sphere and cylinder numbers on the prescription. That requirement describes focusing correction, not a complete eye-health result.
A low prescription does not rule out every eye problem, and a stronger prescription does not by itself identify the cause of a cataract or another eye condition. The clinician interprets the refraction with your symptoms, eye structures, and other examination findings.
Use the result to understand the lens correction being considered. Do not use the prescription alone to decide whether a cataract is causing your symptoms or whether surgery is appropriate.

Know what refraction cannot answer alone
A refraction is one portion of a standard eye exam. It measures how your eyes focus and helps determine a prescription, but it does not establish the full health of the eye by itself.
A comprehensive evaluation may also check the lens, retina, optic nerve, and eye pressure. These areas can affect vision even when a prescription explains part of what you see.
A cataract diagnosis uses a comprehensive eye exam that includes dilation, which widens the pupils.
A slit-lamp exam uses a special microscope to examine the cornea, iris, lens, and other areas at the front of the eye. This examination helps the ophthalmologist look for abnormalities that a refraction cannot establish.
Most eye exams take between 30 minutes and an hour. The exact length depends on your age, medical history, and whether you need additional testing.
Plan enough time for more than the lens comparison if you are having a cataract evaluation.
A consumer estimate available in 2022 placed an eye-health examination at around $135, refractive testing at around $54, and a comprehensive eye exam at about $189. These figures describe estimates for those exam components, not a price quote for your visit.
Ask what type of exam you are arranging and what the fee covers before the visit, especially if you are seeking cataract evaluation rather than refraction alone. A refraction fee may appear on your bill, and insurance may not cover it when it is used to improve vision with glasses and contacts.

Arrange an eye examination for concerning changes
Have regular eye exams. Tell your eye-care professional if your vision worsens or if you have problems with your glasses or contact lenses.
Arrange a professional examination when you want your refraction results interpreted with the rest of your eye findings.
Seek urgent eye care for sudden blurry vision or vision loss, significant eye pain or redness, new flashes or floaters, or a dark curtain or shadow in your vision. New flashes and floaters can signal a torn or detached retina, a serious condition that needs treatment.
Do not wait for a routine refraction when these symptoms begin. Use urgent eye care after a chemical splash, suspected foreign object, or eye trauma, and seek urgent care for a red or painful eye related to contact lenses.
Four common types of refractive error are described in general eye-health guidance; that count refers to common categories, not to a diagnosis for you. The refraction identifies focusing and lens-power needs, while an eye examination determines how those findings fit your symptoms and eye health.
Bring your current glasses or contact-lens prescription if you have it, and describe when the change began. If your vision has changed suddenly or you have any urgent warning sign, seek urgent eye care instead of waiting for a routine appointment.
Book the next step
A refraction is only one part of an eye evaluation. During a cataract evaluation, that result helps guide the discussion, but the broader examination determines what your symptoms mean and what options may fit.
For individualized interpretation of refraction results or concerning vision changes, book an eye exam at Northwest Eye in Minnetonka. A qualified eye-care professional can decide which examination and next step are appropriate for your eyes.
What does refraction testing cost, and when should I seek urgent eye care?
What does a refraction eye test typically cost, and what changes the price?
A refractive test was estimated at around $54 in one 2022 consumer estimate, but your cost may differ. Location, the type of examination, added testing, and insurance coverage can change the amount you pay. Ask the office what the scheduled exam includes and whether a separate refraction fee applies before your visit.
When should I seek urgent eye care instead of scheduling a routine refraction?
Seek urgent eye care for sudden blurry vision or vision loss, significant eye pain or redness, new flashes or floaters, or a dark curtain or shadow. Do the same after a chemical splash, suspected foreign object, or eye trauma, or for a red or painful contact-lens-related eye. Do not wait for a routine appointment when these symptoms begin.





